homeyou

How Much Does it Cost to Get Epoxy Flooring in Monroe?

Typical Range: $2,005 - $2,331

The average epoxy flooring cost in Monroe is $2,005 - $2,331, but it could vary from $1,842 to $2,494. Discover the detailed price range here.

Info valid for your area through 06/29/2017

How Much Does it Cost to Get Epoxy Flooring in Monroe?

Epoxy flooring in Monroe is generally used in garages. Epoxy has a lot of benefits and is proven to be one of the toughest and most durable coatings that can be applied to a garage flooring. It can turn an ugly cement into a sophisticated and beautiful floor. Garage floor epoxy in Monroe has become a top choice among many homeowners today. Not only is it durable, but it is also incredibly strong once turned into a solid polymer. It can be easily installed, saving a lot of time and energy during installation. Epoxy comes in many colors that can give the garage an aesthetic appeal. Epoxy flooring in Monroe is also resistant to fire, changes in temperature, impacts, and slippage. It can also improve the lighting in the garage if you choose a high gloss epoxy solution. If a thicker coating of epoxy is applied, it can also hide irregularities and minor imperfections of the floor. Lastly, epoxy is a topical coating, meaning, it is moisture-resistant. It is a good option for people living in cold and snowy regions. This feature also makes it a low-maintenance flooring solution. Dirt and dust can be cleaned just by using a mop or soft broom.

What is the price for Epoxy Flooring in Monroe, WA?

Home remodeling & home services cost estimates
ITEMQUANTITYLOWHIGH
Epoxy Concrete Sealant Cost215 Square Feet$1,393$1,727
Epoxy Concrete Sealant Labor10.7 Hours$356$655
Epoxy Concrete Sealant Job Materials and Supplies200 Square Feet$45$49
Total Cost to Apply Epoxy Concrete Sealer215 Square Feet$1,794$2,430
Average cost per Square Foot$9$12
Get an estimate from a local pro
Every job is different. Our pros can get you an accurate and fair price quote today.
Or call us directly1-844-HOMEYOU

Fair price breakdown

Before pushing for a new Monroe epoxy flooring project, you must know the three categories of epoxy flooring solutions to be able to estimate the cost of your project. There is 100% solid epoxy coating that is the most expensive and typically used in commercial offices. Then there is solvent-based epoxy coating and water-based epoxy coating. Water-based epoxy can cost around $30 up to $50 per gallon. Solvent-based and solid epoxy are estimated to be around $40 to $150 per gallon.

Get an estimate from a local pro

Every job is different. Our pros can get you an accurate and fair price quote today.

Find the Best Costs on Epoxy Flooring - Monroe, 98272

Hiring a professional to install your epoxy flooring in Monroe can cost around $3 to $15 per square foot or $1,842 to $2,494 for an average one-car garage that is 250 square feet in size and around $1,200 to $6,000 for an average two-car garage. Although some may opt to do the application of epoxy on their own floors to cut costs, it is still recommended to hire a professional to do the job. Professionals have years of experience when it comes to installing epoxy flooring in Monroe. One look around your garage and they may get an exact estimate of how much epoxy will be needed. This will help reduce the risk of overbuying materials for the project. A contractor can also work quickly, saving you a lot of time and effort. You will also be assured that the money paid will not go to waste because their jobs are guaranteed, and the result will be satisfying.

Monroe County Epoxy Flooring FAQ

Epoxy flooring that has undergone proper preparation and installation is guaranteed to last between 8 to 12 years. If you want to prolong its life, it is important that you clean and maintain it regularly. With proper care and maintenance, you can extend its life up to 15 years or more.
Epoxy flooring installation can last up to 3 or 4 days depending on the size of the garage area. The job usually includes the preparation and application of epoxy. Preparation usually takes time, especially if there is an existing coating on the cement that has to be removed. Visible damages like cracks have to be repaired as well. Installation or pouring of epoxy commonly includes two coatings and then the application of optional decorative chips.
Light foot traffic is usually allowed after 24 hours. However, most contractors recommend at least 48 hours to ensure that the epoxy is already dried.

Last Updated: Mar 31, 2017

Local pros & Availability

Concrete Contractors available in your area

1

B-Line Concrete Inc

Rating: 60
724 Park Ln
Monroe, WA 98272
2

Hayes Concrete Products Inc

Rating: 63
14692 179th Ave SE
Monroe, WA 98272
3

Blackhawk Concrete Construction

Rating: 73
22108 Spruce Dr
Monroe, WA 98272
4

Custom Pacific Homes

Rating: 73
17300 Tye St SE
Monroe, WA 98272
5

Hayes Concrete Products Inc

Rating: 72
19401 Washington 203
Monroe, WA 98272
6

Cornerstone Concrete Inc

Rating: 88
P O Box 39
Monroe, WA 98272

Epoxy Flooring highlights

  • Reliable Epoxy Flooring in Monroe WA
  • Renewing
  • Get a Free Quote in Washington Areas
Homeyou logo

Looking to grow your business?

Joining us and start receiving calls from local homeowners looking for your services right now!

Join our network

Recent Requests near Monroe, WA

Driveways & Floors

David C. Bellevue, WA

The driveway is approximately 500 ft, gravel with a steep incline with 3 cutbacks. Vehicles get stuck (spin tires) between 1st and 2nd cutback. I believe the builder put down the wrong material and is not stable. I think it needs proper material and compaction.

Driveways & Floors

Henry G. Seattle, WA

Current driveway is stone/concrete with pressure treated wood separating each quads. There are breaks and cracks in the driveway -- need repair. Also, need to replace pressure treated wood separators.

Driveways & Floors

Kevin L. Federal Way, WA

Install new 25 x 15 foot driveway.

Driveways & Floors

Stephen G. Everett, WA

I am looking at purchasing a house, and I would like a quote on installing a circle driveway. The house is in a bottom so you may need to do some leveling. Thanks

Concrete Work

Matt G. Kent, WA

I am building a metal building. The building contractor did a bad job on first attempt to do slab. It was not square, uneven and dried before being properly finished. He has agreed to do another slab. The building pad is 30x40 4inches thick with a 10 wide x 24 deep footing around perimeter w/ a 16 x 30 patio cover in the front. This area is 4" thick as well, with 4- 2ft piers under area where patio cover pillars are located. I am looking for an estimate to setup and pour slab.

When do you need the job done?

Rather talk with someone?
Call Us Directly

1-844-HOMEYOU

Planning a project?

Our pros offer great prices & great service. Find out the exact price of your home project today!

Project Planning
Epoxy Flooring in Monroe, WA - Costs 10 / 2025 - homeyou