Asphalt in Beaver Falls is commonly used in pavements and driveways. It has become a modern paving solution in many homes due to many reasons. Asphalt in Beaver Falls can create a smooth surface for safe driving. Smooth roads can have a substantial contact with car tires that can result in a safer and more reliable drive. Also, Beaver Falls asphalt is deemed to be cost-effective. The smoothness of asphalt can reduce wear and tear on car tires which can significantly lower the operating cost of the vehicle. Installing asphalt is quick and easy, thus, saving time, money, and labor cost. It is also energy-efficient. It can lessen the rolling resistance between tires and pavement which means better fuel economy and less carbon dioxide emission. When asphalt pavement in Beaver Falls is damaged, it can be replaced easily. The damaged asphalt pavement will not be disposed of, but it will be recycled to be used again. It has been reported that asphalt is the most recycled material in the country with nearly 100 million tons of asphalt pavement being reused and recycled annually. This makes asphalt in Beaver Falls environment-friendly.
What is the price for Asphalt in Beaver Falls, PA?
| ITEM | QUANTITY | LOW | HIGH |
|---|---|---|---|
| Driveway Cost | 215 Square Feet | $13 | $64 |
| Driveway Labor | 2 Hours | $22 | $33 |
| Driveway Job Materials and Supplies | 200 Square Feet | $0 | $0 |
| Driveway Equipment Allowance | $0 | $0 | |
| Total Cost to Install Asphaltic Concrete Driveways | 215 Square Feet | $35 | $97 |
| Average cost per Square Foot | $0 | $0 |
Fair price breakdown
Asphalt is mostly used to pave driveways in many homes. It is affordable and can only cost around $3 to $4 per square foot. Choosing asphalt as a pavement solution is not only economical and practical, but its durability can withstand harsh weather conditions too. Asphalt in Beaver Falls is mostly used by many homeowners living in cold regions, as compared to concrete, because of its ability to adapt to temperature changes. Concrete, on the other hand, has the tendency to crack when exposed to a temperature below freezing point. This could be very costly to repair for homeowners.
Get an estimate from a local pro
Every job is different. Our pros can get you an accurate and fair price quote today.
Find the Best Costs on Asphalt - Beaver Falls, 15010
Several factors can affect the asphalt installation in your pavement. One of this is the local material cost that is usually determined by the freight and current market price in your area. Beaver Falls asphalt, when used as pavement, will need to have good drainage which can also add to the cost of the installation. The base coat will also have an impact on the expense. Coats are usually around $1 to $2.50 per square foot. Special top coats and sealants used in asphalt in Beaver Falls can cost you an additional $1 to $2.5 per square foot for basic top coats and around $3 to $5 for special top coats. Installation of foundation can also add to the overall price of your asphalt project. Installing 8 to 10 inches of gravel below the asphalt can cost around $1 to $2.50 per square foot of the surface area.
Beaver Falls County Asphalt FAQ
Last Updated: Mar 31, 2017
